month ) ) && ( !empty( $wp_locale->weekday ) ) ) {
$datemonth = $wp_locale->get_month( date( 'm', $i ) );
$datemonth_abbrev = $wp_locale->get_month_abbrev( $datemonth );
$dateweekday = $wp_locale->get_weekday( date( 'w', $i ) );
$dateweekday_abbrev = $wp_locale->get_weekday_abbrev( $dateweekday );
$datemeridiem = $wp_locale->get_meridiem( date( 'a', $i ) );
$datemeridiem_capital = $wp_locale->get_meridiem( date( 'A', $i ) );
$dateformatstring = ' '.$dateformatstring;
$dateformatstring = preg_replace( "/([^\\\])D/", "\\1" . backslashit( $dateweekday_abbrev ), $dateformatstring );
$dateformatstring = preg_replace( "/([^\\\])F/", "\\1" . backslashit( $datemonth ), $dateformatstring );
$dateformatstring = preg_replace( "/([^\\\])l/", "\\1" . backslashit( $dateweekday ), $dateformatstring );
$dateformatstring = preg_replace( "/([^\\\])M/", "\\1" . backslashit( $datemonth_abbrev ), $dateformatstring );
$dateformatstring = preg_replace( "/([^\\\])a/", "\\1" . backslashit( $datemeridiem ), $dateformatstring );
$dateformatstring = preg_replace( "/([^\\\])A/", "\\1" . backslashit( $datemeridiem_capital ), $dateformatstring );
$dateformatstring = substr( $dateformatstring, 1, strlen( $dateformatstring ) -1 );
}
$timezone_formats = array( 'P', 'I', 'O', 'T', 'Z', 'e' );
$timezone_formats_re = implode( '|', $timezone_formats );
if ( preg_match( "/$timezone_formats_re/", $dateformatstring ) ) {
$timezone_string = get_option( 'timezone_string' );
if ( $timezone_string ) {
$timezone_object = timezone_open( $timezone_string );
$date_object = date_create( null, $timezone_object );
foreach ( $timezone_formats as $timezone_format ) {
if ( false !== strpos( $dateformatstring, $timezone_format ) ) {
$formatted = date_format( $date_object, $timezone_format );
$dateformatstring = ' '.$dateformatstring;
$dateformatstring = preg_replace( "/([^\\\])$timezone_format/", "\\1" . backslashit( $formatted ), $dateformatstring );
$dateformatstring = substr( $dateformatstring, 1, strlen( $dateformatstring ) -1 );
}
}
}
}
$j = @date( $dateformatstring, $i );
/**
* Filters the date formatted based on the locale.
*
* @since 2.8.0
*
* @param string $j Formatted date string.
* @param string $req_format Format to display the date.
* @param int $i Unix timestamp.
* @param bool $gmt Whether to convert to GMT for time. Default false.
*/
$j = apply_filters( 'date_i18n', $j, $req_format, $i, $gmt );
return $j;
}
/**
* Determines if the date should be declined.
*
* If the locale specifies that month names require a genitive case in certain
* formats (like 'j F Y'), the month name will be replaced with a correct form.
*
* @since 4.4.0
*
* @global WP_Locale $wp_locale
*
* @param string $date Formatted date string.
* @return string The date, declined if locale specifies it.
*/
function wp_maybe_decline_date( $date ) {
global $wp_locale;
// i18n functions are not available in SHORTINIT mode
if ( ! function_exists( '_x' ) ) {
return $date;
}
/* translators: If months in your language require a genitive case,
* translate this to 'on'. Do not translate into your own language.
*/
if ( 'on' === _x( 'off', 'decline months names: on or off' ) ) {
// Match a format like 'j F Y' or 'j. F'
if ( @preg_match( '#^\d{1,2}\.? [^\d ]+#u', $date ) ) {
$months = $wp_locale->month;
$months_genitive = $wp_locale->month_genitive;
foreach ( $months as $key => $month ) {
$months[ $key ] = '# ' . $month . '( |$)#u';
}
foreach ( $months_genitive as $key => $month ) {
$months_genitive[ $key ] = ' ' . $month . '$1';
}
$date = preg_replace( $months, $months_genitive, $date );
}
}
// Used for locale-specific rules
$locale = get_locale();
if ( 'ca' === $locale ) {
// " de abril| de agost| de octubre..." -> " d'abril| d'agost| d'octubre..."
$date = preg_replace( '# de ([ao])#i', " d'\\1", $date );
}
return $date;
}
/**
* Convert float number to format based on the locale.
*
* @since 2.3.0
*
* @global WP_Locale $wp_locale
*
* @param float $number The number to convert based on locale.
* @param int $decimals Optional. Precision of the number of decimal places. Default 0.
* @return string Converted number in string format.
*/
function number_format_i18n( $number, $decimals = 0 ) {
global $wp_locale;
if ( isset( $wp_locale ) ) {
$formatted = number_format( $number, absint( $decimals ), $wp_locale->number_format['decimal_point'], $wp_locale->number_format['thousands_sep'] );
} else {
$formatted = number_format( $number, absint( $decimals ) );
}
/**
* Filters the number formatted based on the locale.
*
* @since 2.8.0
* @since 4.9.0 The `$number` and `$decimals` arguments were added.
*
* @param string $formatted Converted number in string format.
* @param float $number The number to convert based on locale.
* @param int $decimals Precision of the number of decimal places.
*/
return apply_filters( 'number_format_i18n', $formatted, $number, $decimals );
}
/**
* Convert number of bytes largest unit bytes will fit into.
*
* It is easier to read 1 KB than 1024 bytes and 1 MB than 1048576 bytes. Converts
* number of bytes to human readable number by taking the number of that unit
* that the bytes will go into it. Supports TB value.
*
* Please note that integers in PHP are limited to 32 bits, unless they are on
* 64 bit architecture, then they have 64 bit size. If you need to place the
* larger size then what PHP integer type will hold, then use a string. It will
* be converted to a double, which should always have 64 bit length.
*
* Technically the correct unit names for powers of 1024 are KiB, MiB etc.
*
* @since 2.3.0
*
* @param int|string $bytes Number of bytes. Note max integer size for integers.
* @param int $decimals Optional. Precision of number of decimal places. Default 0.
* @return string|false False on failure. Number string on success.
*/
function size_format( $bytes, $decimals = 0 ) {
$quant = array(
'TB' => TB_IN_BYTES,
'GB' => GB_IN_BYTES,
'MB' => MB_IN_BYTES,
'KB' => KB_IN_BYTES,
'B' => 1,
);
if ( 0 === $bytes ) {
return number_format_i18n( 0, $decimals ) . ' B';
}
foreach ( $quant as $unit => $mag ) {
if ( doubleval( $bytes ) >= $mag ) {
return number_format_i18n( $bytes / $mag, $decimals ) . ' ' . $unit;
}
}
return false;
}
/**
* Get the week start and end from the datetime or date string from MySQL.
*
* @since 0.71
*
* @param string $mysqlstring Date or datetime field type from MySQL.
* @param int|string $start_of_week Optional. Start of the week as an integer. Default empty string.
* @return array Keys are 'start' and 'end'.
*/
function get_weekstartend( $mysqlstring, $start_of_week = '' ) {
// MySQL string year.
$my = substr( $mysqlstring, 0, 4 );
// MySQL string month.
$mm = substr( $mysqlstring, 8, 2 );
// MySQL string day.
$md = substr( $mysqlstring, 5, 2 );
// The timestamp for MySQL string day.
$day = mktime( 0, 0, 0, $md, $mm, $my );
// The day of the week from the timestamp.
$weekday = date( 'w', $day );
if ( !is_numeric($start_of_week) )
$start_of_week = get_option( 'start_of_week' );
if ( $weekday < $start_of_week )
$weekday += 7;
// The most recent week start day on or before $day.
$start = $day - DAY_IN_SECONDS * ( $weekday - $start_of_week );
// $start + 1 week - 1 second.
$end = $start + WEEK_IN_SECONDS - 1;
return compact( 'start', 'end' );
}
/**
* Unserialize value only if it was serialized.
*
* @since 2.0.0
*
* @param string $original Maybe unserialized original, if is needed.
* @return mixed Unserialized data can be any type.
*/
function maybe_unserialize( $original ) {
if ( is_serialized( $original ) ) // don't attempt to unserialize data that wasn't serialized going in
return @unserialize( $original );
return $original;
}
/**
* Check value to find if it was serialized.
*
* If $data is not an string, then returned value will always be false.
* Serialized data is always a string.
*
* @since 2.0.5
*
* @param string $data Value to check to see if was serialized.
* @param bool $strict Optional. Whether to be strict about the end of the string. Default true.
* @return bool False if not serialized and true if it was.
*/
function is_serialized( $data, $strict = true ) {
// if it isn't a string, it isn't serialized.
if ( ! is_string( $data ) ) {
return false;
}
$data = trim( $data );
if ( 'N;' == $data ) {
return true;
}
if ( strlen( $data ) < 4 ) {
return false;
}
if ( ':' !== $data[1] ) {
return false;
}
if ( $strict ) {
$lastc = substr( $data, -1 );
if ( ';' !== $lastc && '}' !== $lastc ) {
return false;
}
} else {
$semicolon = strpos( $data, ';' );
$brace = strpos( $data, '}' );
// Either ; or } must exist.
if ( false === $semicolon && false === $brace )
return false;
// But neither must be in the first X characters.
if ( false !== $semicolon && $semicolon < 3 )
return false;
if ( false !== $brace && $brace < 4 )
return false;
}
$token = $data[0];
switch ( $token ) {
case 's' :
if ( $strict ) {
if ( '"' !== substr( $data, -2, 1 ) ) {
return false;
}
} elseif ( false === strpos( $data, '"' ) ) {
return false;
}
// or else fall through
case 'a' :
case 'O' :
return (bool) preg_match( "/^{$token}:[0-9]+:/s", $data );
case 'b' :
case 'i' :
case 'd' :
$end = $strict ? '$' : '';
return (bool) preg_match( "/^{$token}:[0-9.E-]+;$end/", $data );
}
return false;
}
/**
* Check whether serialized data is of string type.
*
* @since 2.0.5
*
* @param string $data Serialized data.
* @return bool False if not a serialized string, true if it is.
*/
function is_serialized_string( $data ) {
// if it isn't a string, it isn't a serialized string.
if ( ! is_string( $data ) ) {
return false;
}
$data = trim( $data );
if ( strlen( $data ) < 4 ) {
return false;
} elseif ( ':' !== $data[1] ) {
return false;
} elseif ( ';' !== substr( $data, -1 ) ) {
return false;
} elseif ( $data[0] !== 's' ) {
return false;
} elseif ( '"' !== substr( $data, -2, 1 ) ) {
return false;
} else {
return true;
}
}
/**
* Serialize data, if needed.
*
* @since 2.0.5
*
* @param string|array|object $data Data that might be serialized.
* @return mixed A scalar data
*/
function maybe_serialize( $data ) {
if ( is_array( $data ) || is_object( $data ) )
return serialize( $data );
// Double serialization is required for backward compatibility.
// See https://core.trac.wordpress.org/ticket/12930
// Also the world will end. See WP 3.6.1.
if ( is_serialized( $data, false ) )
return serialize( $data );
return $data;
}
/**
* Retrieve post title from XMLRPC XML.
*
* If the title element is not part of the XML, then the default post title from
* the $post_default_title will be used instead.
*
* @since 0.71
*
* @global string $post_default_title Default XML-RPC post title.
*
* @param string $content XMLRPC XML Request content
* @return string Post title
*/
function xmlrpc_getposttitle( $content ) {
global $post_default_title;
if ( preg_match( '/(.+?)<\/title>/is', $content, $matchtitle ) ) {
$post_title = $matchtitle[1];
} else {
$post_title = $post_default_title;
}
return $post_title;
}
/**
* Retrieve the post category or categories from XMLRPC XML.
*
* If the category element is not found, then the default post category will be
* used. The return type then would be what $post_default_category. If the
* category is found, then it will always be an array.
*
* @since 0.71
*
* @global string $post_default_category Default XML-RPC post category.
*
* @param string $content XMLRPC XML Request content
* @return string|array List of categories or category name.
*/
function xmlrpc_getpostcategory( $content ) {
global $post_default_category;
if ( preg_match( '/<category>(.+?)<\/category>/is', $content, $matchcat ) ) {
$post_category = trim( $matchcat[1], ',' );
$post_category = explode( ',', $post_category );
} else {
$post_category = $post_default_category;
}
return $post_category;
}
/**
* XMLRPC XML content without title and category elements.
*
* @since 0.71
*
* @param string $content XML-RPC XML Request content.
* @return string XMLRPC XML Request content without title and category elements.
*/
function xmlrpc_removepostdata( $content ) {
$content = preg_replace( '/<title>(.+?)<\/title>/si', '', $content );
$content = preg_replace( '/<category>(.+?)<\/category>/si', '', $content );
$content = trim( $content );
return $content;
}
/**
* Use RegEx to extract URLs from arbitrary content.
*
* @since 3.7.0
*
* @param string $content Content to extract URLs from.
* @return array URLs found in passed string.
*/
function wp_extract_urls( $content ) {
preg_match_all(
"#([\"']?)("
. "(?:([\w-]+:)?//?)"
. "[^\s()<>]+"
. "[.]"
. "(?:"
. "\([\w\d]+\)|"
. "(?:"
. "[^`!()\[\]{};:'\".,<>«»“”‘’\s]|"
. "(?:[:]\d+)?/?"
. ")+"
. ")"
. ")\\1#",
$content,
$post_links
);
$post_links = array_unique( array_map( 'html_entity_decode', $post_links[2] ) );
return array_values( $post_links );
}
/**
* Check content for video and audio links to add as enclosures.
*
* Will not add enclosures that have already been added and will
* remove enclosures that are no longer in the post. This is called as
* pingbacks and trackbacks.
*
* @since 1.5.0
*
* @global wpdb $wpdb WordPress database abstraction object.
*
* @param string $content Post Content.
* @param int $post_ID Post ID.
*/
function do_enclose( $content, $post_ID ) {
global $wpdb;
//TODO: Tidy this ghetto code up and make the debug code optional
include_once( ABSPATH . WPINC . '/class-IXR.php' );
$post_links = array();
$pung = get_enclosed( $post_ID );
$post_links_temp = wp_extract_urls( $content );
foreach ( $pung as $link_test ) {
if ( ! in_array( $link_test, $post_links_temp ) ) { // link no longer in post
$mids = $wpdb->get_col( $wpdb->prepare("SELECT meta_id FROM $wpdb->postmeta WHERE post_id = %d AND meta_key = 'enclosure' AND meta_value LIKE %s", $post_ID, $wpdb->esc_like( $link_test ) . '%') );
foreach ( $mids as $mid )
delete_metadata_by_mid( 'post', $mid );
}
}
foreach ( (array) $post_links_temp as $link_test ) {
if ( !in_array( $link_test, $pung ) ) { // If we haven't pung it already
$test = @parse_url( $link_test );
if ( false === $test )
continue;
if ( isset( $test['query'] ) )
$post_links[] = $link_test;
elseif ( isset($test['path']) && ( $test['path'] != '/' ) && ($test['path'] != '' ) )
$post_links[] = $link_test;
}
}
/**
* Filters the list of enclosure links before querying the database.
*
* Allows for the addition and/or removal of potential enclosures to save
* to postmeta before checking the database for existing enclosures.
*
* @since 4.4.0
*
* @param array $post_links An array of enclosure links.
* @param int $post_ID Post ID.
*/
$post_links = apply_filters( 'enclosure_links', $post_links, $post_ID );
foreach ( (array) $post_links as $url ) {
if ( $url != '' && !$wpdb->get_var( $wpdb->prepare( "SELECT post_id FROM $wpdb->postmeta WHERE post_id = %d AND meta_key = 'enclosure' AND meta_value LIKE %s", $post_ID, $wpdb->esc_like( $url ) . '%' ) ) ) {
if ( $headers = wp_get_http_headers( $url) ) {
$len = isset( $headers['content-length'] ) ? (int) $headers['content-length'] : 0;
$type = isset( $headers['content-type'] ) ? $headers['content-type'] : '';
$allowed_types = array( 'video', 'audio' );
// Check to see if we can figure out the mime type from
// the extension
$url_parts = @parse_url( $url );
if ( false !== $url_parts ) {
$extension = pathinfo( $url_parts['path'], PATHINFO_EXTENSION );
if ( !empty( $extension ) ) {
foreach ( wp_get_mime_types() as $exts => $mime ) {
if ( preg_match( '!^(' . $exts . ')$!i', $extension ) ) {
$type = $mime;
break;
}
}
}
}
if ( in_array( substr( $type, 0, strpos( $type, "/" ) ), $allowed_types ) ) {
add_post_meta( $post_ID, 'enclosure', "$url\n$len\n$mime\n" );
}
}
}
}
}
/**
* Retrieve HTTP Headers from URL.
*
* @since 1.5.1
*
* @param string $url URL to retrieve HTTP headers from.
* @param bool $deprecated Not Used.
* @return bool|string False on failure, headers on success.
*/
function wp_get_http_headers( $url, $deprecated = false ) {
if ( !empty( $deprecated ) )
_deprecated_argument( __FUNCTION__, '2.7.0' );
$response = wp_safe_remote_head( $url );
if ( is_wp_error( $response ) )
return false;
return wp_remote_retrieve_headers( $response );
}
/**
* Whether the publish date of the current post in the loop is different from the
* publish date of the previous post in the loop.
*
* @since 0.71
*
* @global string $currentday The day of the current post in the loop.
* @global string $previousday The day of the previous post in the loop.
*
* @return int 1 when new day, 0 if not a new day.
*/
function is_new_day() {
global $currentday, $previousday;
if ( $currentday != $previousday )
return 1;
else
return 0;
}
/**
* Build URL query based on an associative and, or indexed array.
*
* This is a convenient function for easily building url queries. It sets the
* separator to '&' and uses _http_build_query() function.
*
* @since 2.3.0
*
* @see _http_build_query() Used to build the query
* @link https://secure.php.net/manual/en/function.http-build-query.php for more on what
* http_build_query() does.
*
* @param array $data URL-encode key/value pairs.
* @return string URL-encoded string.
*/
function build_query( $data ) {
return _http_build_query( $data, null, '&', '', false );
}
/**
* From php.net (modified by Mark Jaquith to behave like the native PHP5 function).
*
* @since 3.2.0
* @access private
*
* @see https://secure.php.net/manual/en/function.http-build-query.php
*
* @param array|object $data An array or object of data. Converted to array.
* @param string $prefix Optional. Numeric index. If set, start parameter numbering with it.
* Default null.
* @param string $sep Optional. Argument separator; defaults to 'arg_separator.output'.
* Default null.
* @param string $key Optional. Used to prefix key name. Default empty.
* @param bool $urlencode Optional. Whether to use urlencode() in the result. Default true.
*
* @return string The query string.
*/
function _http_build_query( $data, $prefix = null, $sep = null, $key = '', $urlencode = true ) {
$ret = array();
foreach ( (array) $data as $k => $v ) {
if ( $urlencode)
$k = urlencode($k);
if ( is_int($k) && $prefix != null )
$k = $prefix.$k;
if ( !empty($key) )
$k = $key . '%5B' . $k . '%5D';
if ( $v === null )
continue;
elseif ( $v === false )
$v = '0';
if ( is_array($v) || is_object($v) )
array_push($ret,_http_build_query($v, '', $sep, $k, $urlencode));
elseif ( $urlencode )
array_push($ret, $k.'='.urlencode($v));
else
array_push($ret, $k.'='.$v);
}
if ( null === $sep )
$sep = ini_get('arg_separator.output');
return implode($sep, $ret);
}
/**
* Retrieves a modified URL query string.
*
* You can rebuild the URL and append query variables to the URL query by using this function.
* There are two ways to use this function; either a single key and value, or an associative array.
*
* Using a single key and value:
*
* add_query_arg( 'key', 'value', 'http://example.com' );
*
* Using an associative array:
*
* add_query_arg( array(
* 'key1' => 'value1',
* 'key2' => 'value2',
* ), 'http://example.com' );
*
* Omitting the URL from either use results in the current URL being used
* (the value of `$_SERVER['REQUEST_URI']`).
*
* Values are expected to be encoded appropriately with urlencode() or rawurlencode().
*
* Setting any query variable's value to boolean false removes the key (see remove_query_arg()).
*
* Important: The return value of add_query_arg() is not escaped by default. Output should be
* late-escaped with esc_url() or similar to help prevent vulnerability to cross-site scripting
* (XSS) attacks.
*
* @since 1.5.0
*
* @param string|array $key Either a query variable key, or an associative array of query variables.
* @param string $value Optional. Either a query variable value, or a URL to act upon.
* @param string $url Optional. A URL to act upon.
* @return string New URL query string (unescaped).
*/
function add_query_arg() {
$args = func_get_args();
if ( is_array( $args[0] ) ) {
if ( count( $args ) < 2 || false === $args[1] )
$uri = $_SERVER['REQUEST_URI'];
else
$uri = $args[1];
} else {
if ( count( $args ) < 3 || false === $args[2] )
$uri = $_SERVER['REQUEST_URI'];
else
$uri = $args[2];
}
if ( $frag = strstr( $uri, '#' ) )
$uri = substr( $uri, 0, -strlen( $frag ) );
else
$frag = '';
if ( 0 === stripos( $uri, 'http://' ) ) {
$protocol = 'http://';
$uri = substr( $uri, 7 );
} elseif ( 0 === stripos( $uri, 'https://' ) ) {
$protocol = 'https://';
$uri = substr( $uri, 8 );
} else {
$protocol = '';
}
if ( strpos( $uri, '?' ) !== false ) {
list( $base, $query ) = explode( '?', $uri, 2 );
$base .= '?';
} elseif ( $protocol || strpos( $uri, '=' ) === false ) {
$base = $uri . '?';
$query = '';
} else {
$base = '';
$query = $uri;
}
wp_parse_str( $query, $qs );
$qs = urlencode_deep( $qs ); // this re-URL-encodes things that were already in the query string
if ( is_array( $args[0] ) ) {
foreach ( $args[0] as $k => $v ) {
$qs[ $k ] = $v;
}
} else {
$qs[ $args[0] ] = $args[1];
}
foreach ( $qs as $k => $v ) {
if ( $v === false )
unset( $qs[$k] );
}
$ret = build_query( $qs );
$ret = trim( $ret, '?' );
$ret = preg_replace( '#=(&|$)#', '$1', $ret );
$ret = $protocol . $base . $ret . $frag;
$ret = rtrim( $ret, '?' );
return $ret;
}
/**
* Removes an item or items from a query string.
*
* @since 1.5.0
*
* @param string|array $key Query key or keys to remove.
* @param bool|string $query Optional. When false uses the current URL. Default false.
* @return string New URL query string.
*/
function remove_query_arg( $key, $query = false ) {
if ( is_array( $key ) ) { // removing multiple keys
foreach ( $key as $k )
$query = add_query_arg( $k, false, $query );
return $query;
}
return add_query_arg( $key, false, $query );
}
/**
* Returns an array of single-use query variable names that can be removed from a URL.
*
* @since 4.4.0
*
* @return array An array of parameters to remove from the URL.
*/
function wp_removable_query_args() {
$removable_query_args = array(
'activate',
'activated',
'approved',
'deactivate',
'deleted',
'disabled',
'enabled',
'error',
'hotkeys_highlight_first',
'hotkeys_highlight_last',
'locked',
'message',
'same',
'saved',
'settings-updated',
'skipped',
'spammed',
'trashed',
'unspammed',
'untrashed',
'update',
'updated',
'wp-post-new-reload',
);
/**
* Filters the list of query variables to remove.
*
* @since 4.2.0
*
* @param array $removable_query_args An array of query variables to remove from a URL.
*/
return apply_filters( 'removable_query_args', $removable_query_args );
}
/**
* Walks the array while sanitizing the contents.
*
* @since 0.71
*
* @param array $array Array to walk while sanitizing contents.
* @return array Sanitized $array.
*/
function add_magic_quotes( $array ) {
foreach ( (array) $array as $k => $v ) {
if ( is_array( $v ) ) {
$array[$k] = add_magic_quotes( $v );
} else {
$array[$k] = addslashes( $v );
}
}
return $array;
}
/**
* HTTP request for URI to retrieve content.
*
* @since 1.5.1
*
* @see wp_safe_remote_get()
*
* @param string $uri URI/URL of web page to retrieve.
* @return false|string HTTP content. False on failure.
*/
function wp_remote_fopen( $uri ) {
$parsed_url = @parse_url( $uri );
if ( !$parsed_url || !is_array( $parsed_url ) )
return false;
$options = array();
$options['timeout'] = 10;
$response = wp_safe_remote_get( $uri, $options );
if ( is_wp_error( $response ) )
return false;
return wp_remote_retrieve_body( $response );
}
/**
* Set up the WordPress query.
*
* @since 2.0.0
*
* @global WP $wp_locale
* @global WP_Query $wp_query
* @global WP_Query $wp_the_query
*
* @param string|array $query_vars Default WP_Query arguments.
*/
function wp( $query_vars = '' ) {
global $wp, $wp_query, $wp_the_query;
$wp->main( $query_vars );
if ( !isset($wp_the_query) )
$wp_the_query = $wp_query;
}
/**
* Retrieve the description for the HTTP status.
*
* @since 2.3.0
*
* @global array $wp_header_to_desc
*
* @param int $code HTTP status code.
* @return string Empty string if not found, or description if found.
*/
function get_status_header_desc( $code ) {
global $wp_header_to_desc;
$code = absint( $code );
if ( !isset( $wp_header_to_desc ) ) {
$wp_header_to_desc = array(
100 => 'Continue',
101 => 'Switching Protocols',
102 => 'Processing',
200 => 'OK',
201 => 'Created',
202 => 'Accepted',
203 => 'Non-Authoritative Information',
204 => 'No Content',
205 => 'Reset Content',
206 => 'Partial Content',
207 => 'Multi-Status',
226 => 'IM Used',
300 => 'Multiple Choices',
301 => 'Moved Permanently',
302 => 'Found',
303 => 'See Other',
304 => 'Not Modified',
305 => 'Use Proxy',
306 => 'Reserved',
307 => 'Temporary Redirect',
308 => 'Permanent Redirect',
400 => 'Bad Request',
401 => 'Unauthorized',
402 => 'Payment Required',
403 => 'Forbidden',
404 => 'Not Found',
405 => 'Method Not Allowed',
406 => 'Not Acceptable',
407 => 'Proxy Authentication Required',
408 => 'Request Timeout',
409 => 'Conflict',
410 => 'Gone',
411 => 'Length Required',
412 => 'Precondition Failed',
413 => 'Request Entity Too Large',
414 => 'Request-URI Too Long',
415 => 'Unsupported Media Type',
416 => 'Requested Range Not Satisfiable',
417 => 'Expectation Failed',
418 => 'I\'m a teapot',
421 => 'Misdirected Request',
422 => 'Unprocessable Entity',
423 => 'Locked',
424 => 'Failed Dependency',
426 => 'Upgrade Required',
428 => 'Precondition Required',
429 => 'Too Many Requests',
431 => 'Request Header Fields Too Large',
451 => 'Unavailable For Legal Reasons',
500 => 'Internal Server Error',
501 => 'Not Implemented',
502 => 'Bad Gateway',
503 => 'Service Unavailable',
504 => 'Gateway Timeout',
505 => 'HTTP Version Not Supported',
506 => 'Variant Also Negotiates',
507 => 'Insufficient Storage',
510 => 'Not Extended',
511 => 'Network Authentication Required',
);
}
if ( isset( $wp_header_to_desc[$code] ) )
return $wp_header_to_desc[$code];
else
return '';
}
/**
* Set HTTP status header.
*
* @since 2.0.0
* @since 4.4.0 Added the `$description` parameter.
*
* @see get_status_header_desc()
*
* @param int $code HTTP status code.
* @param string $description Optional. A custom description for the HTTP status.
*/
function status_header( $code, $description = '' ) {
if ( ! $description ) {
$description = get_status_header_desc( $code );
}
if ( empty( $description ) ) {
return;
}
$protocol = wp_get_server_protocol();
$status_header = "$protocol $code $description";
if ( function_exists( 'apply_filters' ) )
/**
* Filters an HTTP status header.
*
* @since 2.2.0
*
* @param string $status_header HTTP status header.
* @param int $code HTTP status code.
* @param string $description Description for the status code.
* @param string $protocol Server protocol.
*/
$status_header = apply_filters( 'status_header', $status_header, $code, $description, $protocol );
@header( $status_header, true, $code );
}
/**
* Get the header information to prevent caching.
*
* The several different headers cover the different ways cache prevention
* is handled by different browsers
*
* @since 2.8.0
*
* @return array The associative array of header names and field values.
*/
function wp_get_nocache_headers() {
$headers = array(
'Expires' => 'Wed, 11 Jan 1984 05:00:00 GMT',
'Cache-Control' => 'no-cache, must-revalidate, max-age=0',
);
if ( function_exists('apply_filters') ) {
/**
* Filters the cache-controlling headers.
*
* @since 2.8.0
*
* @see wp_get_nocache_headers()
*
* @param array $headers {
* Header names and field values.
*
* @type string $Expires Expires header.
* @type string $Cache-Control Cache-Control header.
* }
*/
$headers = (array) apply_filters( 'nocache_headers', $headers );
}
$headers['Last-Modified'] = false;
return $headers;
}
/**
* Set the headers to prevent caching for the different browsers.
*
* Different browsers support different nocache headers, so several
* headers must be sent so that all of them get the point that no
* caching should occur.
*
* @since 2.0.0
*
* @see wp_get_nocache_headers()
*/
function nocache_headers() {
$headers = wp_get_nocache_headers();
unset( $headers['Last-Modified'] );
// In PHP 5.3+, make sure we are not sending a Last-Modified header.
if ( function_exists( 'header_remove' ) ) {
@header_remove( 'Last-Modified' );
} else {
// In PHP 5.2, send an empty Last-Modified header, but only as a
// last resort to override a header already sent. #WP23021
foreach ( headers_list() as $header ) {
if ( 0 === stripos( $header, 'Last-Modified' ) ) {
$headers['Last-Modified'] = '';
break;
}
}
}
foreach ( $headers as $name => $field_value )
@header("{$name}: {$field_value}");
}
/**
* Set the headers for caching for 10 days with JavaScript content type.
*
* @since 2.1.0
*/
function cache_javascript_headers() {
$expiresOffset = 10 * DAY_IN_SECONDS;
header( "Content-Type: text/javascript; charset=" . get_bloginfo( 'charset' ) );
header( "Vary: Accept-Encoding" ); // Handle proxies
header( "Expires: " . gmdate( "D, d M Y H:i:s", time() + $expiresOffset ) . " GMT" );
}
/**
* Retrieve the number of database queries during the WordPress execution.
*
* @since 2.0.0
*
* @global wpdb $wpdb WordPress database abstraction object.
*
* @return int Number of database queries.
*/
function get_num_queries() {
global $wpdb;
return $wpdb->num_queries;
}
/**
* Whether input is yes or no.
*
* Must be 'y' to be true.
*
* @since 1.0.0
*
* @param string $yn Character string containing either 'y' (yes) or 'n' (no).
* @return bool True if yes, false on anything else.
*/
function bool_from_yn( $yn ) {
return ( strtolower( $yn ) == 'y' );
}
/**
* Load the feed template from the use of an action hook.
*
* If the feed action does not have a hook, then the function will die with a
* message telling the visitor that the feed is not valid.
*
* It is better to only have one hook for each feed.
*
* @since 2.1.0
*
* @global WP_Query $wp_query Used to tell if the use a comment feed.
*/
function do_feed() {
global $wp_query;
$feed = get_query_var( 'feed' );
// Remove the pad, if present.
$feed = preg_replace( '/^_+/', '', $feed );
if ( $feed == '' || $feed == 'feed' )
$feed = get_default_feed();
if ( ! has_action( "do_feed_{$feed}" ) ) {
wp_die( __( 'ERROR: This is not a valid feed template.' ), '', array( 'response' => 404 ) );
}
/**
* Fires once the given feed is loaded.
*
* The dynamic portion of the hook name, `$feed`, refers to the feed template name.
* Possible values include: 'rdf', 'rss', 'rss2', and 'atom'.
*
* @since 2.1.0
* @since 4.4.0 The `$feed` parameter was added.
*
* @param bool $is_comment_feed Whether the feed is a comment feed.
* @param string $feed The feed name.
*/
do_action( "do_feed_{$feed}", $wp_query->is_comment_feed, $feed );
}
/**
* Load the RDF RSS 0.91 Feed template.
*
* @since 2.1.0
*
* @see load_template()
*/
function do_feed_rdf() {
load_template( ABSPATH . WPINC . '/feed-rdf.php' );
}
/**
* Load the RSS 1.0 Feed Template.
*
* @since 2.1.0
*
* @see load_template()
*/
function do_feed_rss() {
load_template( ABSPATH . WPINC . '/feed-rss.php' );
}
/**
* Load either the RSS2 comment feed or the RSS2 posts feed.
*
* @since 2.1.0
*
* @see load_template()
*
* @param bool $for_comments True for the comment feed, false for normal feed.
*/
function do_feed_rss2( $for_comments ) {
if ( $for_comments )
load_template( ABSPATH . WPINC . '/feed-rss2-comments.php' );
else
load_template( ABSPATH . WPINC . '/feed-rss2.php' );
}
/**
* Load either Atom comment feed or Atom posts feed.
*
* @since 2.1.0
*
* @see load_template()
*
* @param bool $for_comments True for the comment feed, false for normal feed.
*/
function do_feed_atom( $for_comments ) {
if ($for_comments)
load_template( ABSPATH . WPINC . '/feed-atom-comments.php');
else
load_template( ABSPATH . WPINC . '/feed-atom.php' );
}
/**
* Display the robots.txt file content.
*
* The echo content should be with usage of the permalinks or for creating the
* robots.txt file.
*
* @since 2.1.0
*/
function do_robots() {
header( 'Content-Type: text/plain; charset=utf-8' );
/**
* Fires when displaying the robots.txt file.
*
* @since 2.1.0
*/
do_action( 'do_robotstxt' );
$output = "User-agent: *\n";
$public = get_option( 'blog_public' );
if ( '0' == $public ) {
$output .= "Disallow: /\n";
} else {
$site_url = parse_url( site_url() );
$path = ( !empty( $site_url['path'] ) ) ? $site_url['path'] : '';
$output .= "Disallow: $path/wp-admin/\n";
$output .= "Allow: $path/wp-admin/admin-ajax.php\n";
}
/**
* Filters the robots.txt output.
*
* @since 3.0.0
*
* @param string $output Robots.txt output.
* @param bool $public Whether the site is considered "public".
*/
echo apply_filters( 'robots_txt', $output, $public );
}
/**
* Test whether WordPress is already installed.
*
* The cache will be checked first. If you have a cache plugin, which saves
* the cache values, then this will work. If you use the default WordPress
* cache, and the database goes away, then you might have problems.
*
* Checks for the 'siteurl' option for whether WordPress is installed.
*
* @since 2.1.0
*
* @global wpdb $wpdb WordPress database abstraction object.
*
* @return bool Whether the site is already installed.
*/
function is_blog_installed() {
global $wpdb;
/*
* Check cache first. If options table goes away and we have true
* cached, oh well.
*/
if ( wp_cache_get( 'is_blog_installed' ) )
return true;
$suppress = $wpdb->suppress_errors();
if ( ! wp_installing() ) {
$alloptions = wp_load_alloptions();
}
// If siteurl is not set to autoload, check it specifically
if ( !isset( $alloptions['siteurl'] ) )
$installed = $wpdb->get_var( "SELECT option_value FROM $wpdb->options WHERE option_name = 'siteurl'" );
else
$installed = $alloptions['siteurl'];
$wpdb->suppress_errors( $suppress );
$installed = !empty( $installed );
wp_cache_set( 'is_blog_installed', $installed );
if ( $installed )
return true;
// If visiting repair.php, return true and let it take over.
if ( defined( 'WP_REPAIRING' ) )
return true;
$suppress = $wpdb->suppress_errors();
/*
* Loop over the WP tables. If none exist, then scratch installation is allowed.
* If one or more exist, suggest table repair since we got here because the
* options table could not be accessed.
*/
$wp_tables = $wpdb->tables();
foreach ( $wp_tables as $table ) {
// The existence of custom user tables shouldn't suggest an insane state or prevent a clean installation.
if ( defined( 'CUSTOM_USER_TABLE' ) && CUSTOM_USER_TABLE == $table )
continue;
if ( defined( 'CUSTOM_USER_META_TABLE' ) && CUSTOM_USER_META_TABLE == $table )
continue;
if ( ! $wpdb->get_results( "DESCRIBE $table;" ) )
continue;
// One or more tables exist. We are insane.
wp_load_translations_early();
// Die with a DB error.
$wpdb->error = sprintf(
/* translators: %s: database repair URL */
__( 'One or more database tables are unavailable. The database may need to be <a href="%s">repaired</a>.' ),
'maint/repair.php?referrer=is_blog_installed'
);
dead_db();
}
$wpdb->suppress_errors( $suppress );
wp_cache_set( 'is_blog_installed', false );
return false;
}
/**
* Retrieve URL with nonce added to URL query.
*
* @since 2.0.4
*
* @param string $actionurl URL to add nonce action.
* @param int|string $action Optional. Nonce action name. Default -1.
* @param string $name Optional. Nonce name. Default '_wpnonce'.
* @return string Escaped URL with nonce action added.
*/
function wp_nonce_url( $actionurl, $action = -1, $name = '_wpnonce' ) {
$actionurl = str_replace( '&', '&', $actionurl );
return esc_html( add_query_arg( $name, wp_create_nonce( $action ), $actionurl ) );
}
/**
* Retrieve or display nonce hidden field for forms.
*
* The nonce field is used to validate that the contents of the form came from
* the location on the current site and not somewhere else. The nonce does not
* offer absolute protection, but should protect against most cases. It is very
* important to use nonce field in forms.
*
* The $action and $name are optional, but if you want to have better security,
* it is strongly suggested to set those two parameters. It is easier to just
* call the function without any parameters, because validation of the nonce
* doesn't require any parameters, but since crackers know what the default is
* it won't be difficult for them to find a way around your nonce and cause
* damage.
*
* The input name will be whatever $name value you gave. The input value will be
* the nonce creation value.
*
* @since 2.0.4
*
* @param int|string $action Optional. Action name. Default -1.
* @param string $name Optional. Nonce name. Default '_wpnonce'.
* @param bool $referer Optional. Whether to set the referer field for validation. Default true.
* @param bool $echo Optional. Whether to display or return hidden form field. Default true.
* @return string Nonce field HTML markup.
*/
function wp_nonce_field( $action = -1, $name = "_wpnonce", $referer = true , $echo = true ) {
$name = esc_attr( $name );
$nonce_field = '<input type="hidden" id="' . $name . '" name="' . $name . '" value="' . wp_create_nonce( $action ) . '" />';
if ( $referer )
$nonce_field .= wp_referer_field( false );
if ( $echo )
echo $nonce_field;
return $nonce_field;
}
/**
* Retrieve or display referer hidden field for forms.
*
* The referer link is the current Request URI from the server super global. The
* input name is '_wp_http_referer', in case you wanted to check manually.
*
* @since 2.0.4
*
* @param bool $echo Optional. Whether to echo or return the referer field. Default true.
* @return string Referer field HTML markup.
*/
function wp_referer_field( $echo = true ) {
$referer_field = '<input type="hidden" name="_wp_http_referer" value="'. esc_attr( wp_unslash( $_SERVER['REQUEST_URI'] ) ) . '" />';
if ( $echo )
echo $referer_field;
return $referer_field;
}
/**
* Retrieve or display original referer hidden field for forms.
*
* The input name is '_wp_original_http_referer' and will be either the same
* value of wp_referer_field(), if that was posted already or it will be the
* current page, if it doesn't exist.
*
* @since 2.0.4
*
* @param bool $echo Optional. Whether to echo the original http referer. Default true.
* @param string $jump_back_to Optional. Can be 'previous' or page you want to jump back to.
* Default 'current'.
* @return string Original referer field.
*/
function wp_original_referer_field( $echo = true, $jump_back_to = 'current' ) {
if ( ! $ref = wp_get_original_referer() ) {
$ref = 'previous' == $jump_back_to ? wp_get_referer() : wp_unslash( $_SERVER['REQUEST_URI'] );
}
$orig_referer_field = '<input type="hidden" name="_wp_original_http_referer" value="' . esc_attr( $ref ) . '" />';
if ( $echo )
echo $orig_referer_field;
return $orig_referer_field;
}
/**
* Retrieve referer from '_wp_http_referer' or HTTP referer.
*
* If it's the same as the current request URL, will return false.
*
* @since 2.0.4
*
* @return false|string False on failure. Referer URL on success.
*/
function wp_get_referer() {
if ( ! function_exists( 'wp_validate_redirect' ) ) {
return false;
}
$ref = wp_get_raw_referer();
if ( $ref && $ref !== wp_unslash( $_SERVER['REQUEST_URI'] ) && $ref !== home_url() . wp_unslash( $_SERVER['REQUEST_URI'] ) ) {
return wp_validate_redirect( $ref, false );
}
return false;
}
/**
* Retrieves unvalidated referer from '_wp_http_referer' or HTTP referer.
*
* Do not use for redirects, use wp_get_referer() instead.
*
* @since 4.5.0
*
* @return string|false Referer URL on success, false on failure.
*/
function wp_get_raw_referer() {
if ( ! empty( $_REQUEST['_wp_http_referer'] ) ) {
return wp_unslash( $_REQUEST['_wp_http_referer'] );
} else if ( ! empty( $_SERVER['HTTP_REFERER'] ) ) {
return wp_unslash( $_SERVER['HTTP_REFERER'] );
}
return false;
}
/**
* Retrieve original referer that was posted, if it exists.
*
* @since 2.0.4
*
* @return string|false False if no original referer or original referer if set.
*/
function wp_get_original_referer() {
if ( ! empty( $_REQUEST['_wp_original_http_referer'] ) && function_exists( 'wp_validate_redirect' ) )
return wp_validate_redirect( wp_unslash( $_REQUEST['_wp_original_http_referer'] ), false );
return false;
}
/**
* Recursive directory creation based on full path.
*
* Will attempt to set permissions on folders.
*
* @since 2.0.1
*
* @param string $target Full path to attempt to create.
* @return bool Whether the path was created. True if path already exists.
*/
function wp_mkdir_p( $target ) {
$wrapper = null;
// Strip the protocol.
if ( wp_is_stream( $target ) ) {
list( $wrapper, $target ) = explode( '://', $target, 2 );
}
// From php.net/mkdir user contributed notes.
$target = str_replace( '//', '/', $target );
// Put the wrapper back on the target.
if ( $wrapper !== null ) {
$target = $wrapper . '://' . $target;
}
/*
* Safe mode fails with a trailing slash under certain PHP versions.
* Use rtrim() instead of untrailingslashit to avoid formatting.php dependency.
*/
$target = rtrim($target, '/');
if ( empty($target) )
$target = '/';
if ( file_exists( $target ) )
return @is_dir( $target );
// We need to find the permissions of the parent folder that exists and inherit that.
$target_parent = dirname( $target );
while ( '.' != $target_parent && ! is_dir( $target_parent ) ) {
$target_parent = dirname( $target_parent );
}
// Get the permission bits.
if ( $stat = @stat( $target_parent ) ) {
$dir_perms = $stat['mode'] & 0007777;
} else {
$dir_perms = 0777;
}
if ( @mkdir( $target, $dir_perms, true ) ) {
/*
* If a umask is set that modifies $dir_perms, we'll have to re-set
* the $dir_perms correctly with chmod()
*/
if ( $dir_perms != ( $dir_perms & ~umask() ) ) {
$folder_parts = explode( '/', substr( $target, strlen( $target_parent ) + 1 ) );
for ( $i = 1, $c = count( $folder_parts ); $i <= $c; $i++ ) {
@chmod( $target_parent . '/' . implode( '/', array_slice( $folder_parts, 0, $i ) ), $dir_perms );
}
}
return true;
}
return false;
}
/**
* Test if a given filesystem path is absolute.
*
* For example, '/foo/bar', or 'c:\windows'.
*
* @since 2.5.0
*
* @param string $path File path.
* @return bool True if path is absolute, false is not absolute.
*/
function path_is_absolute( $path ) {
/*
* This is definitive if true but fails if $path does not exist or contains
* a symbolic link.
*/
if ( realpath($path) == $path )
return true;
if ( strlen($path) == 0 || $path[0] == '.' )
return false;
// Windows allows absolute paths like this.
if ( preg_match('#^[a-zA-Z]:\\\\#', $path) )
return true;
// A path starting with / or \ is absolute; anything else is relative.
return ( $path[0] == '/' || $path[0] == '\\' );
}
/**
* Join two filesystem paths together.
*
* For example, 'give me $path relative to $base'. If the $path is absolute,
* then it the full path is returned.
*
* @since 2.5.0
*
* @param string $base Base path.
* @param string $path Path relative to $base.
* @return string The path with the base or absolute path.
*/
function path_join( $base, $path ) {
if ( path_is_absolute($path) )
return $path;
return rtrim($base, '/') . '/' . ltrim($path, '/');
}
/**
* Normalize a filesystem path.
*
* On windows systems, replaces backslashes with forward slashes
* and forces upper-case drive letters.
* Allows for two leading slashes for Windows network shares, but
* ensures that all other duplicate slashes are reduced to a single.
*
* @since 3.9.0
* @since 4.4.0 Ensures upper-case drive letters on Windows systems.
* @since 4.5.0 Allows for Windows network shares.
*
* @param string $path Path to normalize.
* @return string Normalized path.
*/
function wp_normalize_path( $path ) {
$path = str_replace( '\\', '/', $path );
$path = preg_replace( '|(?<=.)/+|', '/', $path );
if ( ':' === substr( $path, 1, 1 ) ) {
$path = ucfirst( $path );
}
return $path;
}
/**
* Determine a writable directory for temporary files.
*
* Function's preference is the return value of sys_get_temp_dir(),
* followed by your PHP temporary upload directory, followed by WP_CONTENT_DIR,
* before finally defaulting to /tmp/
*
* In the event that this function does not find a writable location,
* It may be overridden by the WP_TEMP_DIR constant in your wp-config.php file.
*
* @since 2.5.0
*
* @staticvar string $temp
*
* @return string Writable temporary directory.
*/
function get_temp_dir() {
static $temp = '';
if ( defined('WP_TEMP_DIR') )
return trailingslashit(WP_TEMP_DIR);
if ( $temp )
return trailingslashit( $temp );
if ( function_exists('sys_get_temp_dir') ) {
$temp = sys_get_temp_dir();
if ( @is_dir( $temp ) && wp_is_writable( $temp ) )
return trailingslashit( $temp );
}
$temp = ini_get('upload_tmp_dir');
if ( @is_dir( $temp ) && wp_is_writable( $temp ) )
return trailingslashit( $temp );
$temp = WP_CONTENT_DIR . '/';
if ( is_dir( $temp ) && wp_is_writable( $temp ) )
return $temp;
return '/tmp/';
}
/**
* Determine if a directory is writable.
*
* This function is used to work around certain ACL issues in PHP primarily
* affecting Windows Servers.
*
* @since 3.6.0
*
* @see win_is_writable()
*
* @param string $path Path to check for write-ability.
* @return bool Whether the path is writable.
*/
function wp_is_writable( $path ) {
if ( 'WIN' === strtoupper( substr( PHP_OS, 0, 3 ) ) )
return win_is_writable( $path );
else
return @is_writable( $path );
}
/**
* Workaround for Windows bug in is_writable() function
*
* PHP has issues with Windows ACL's for determine if a
* directory is writable or not, this works around them by
* checking the ability to open files rather than relying
* upon PHP to interprate the OS ACL.
*
* @since 2.8.0
*
* @see https://bugs.php.net/bug.php?id=27609
* @see https://bugs.php.net/bug.php?id=30931
*
* @param string $path Windows path to check for write-ability.
* @return bool Whether the path is writable.
*/
function win_is_writable( $path ) {
if ( $path[strlen( $path ) - 1] == '/' ) { // if it looks like a directory, check a random file within the directory
return win_is_writable( $path . uniqid( mt_rand() ) . '.tmp');
} elseif ( is_dir( $path ) ) { // If it's a directory (and not a file) check a random file within the directory
return win_is_writable( $path . '/' . uniqid( mt_rand() ) . '.tmp' );
}
// check tmp file for read/write capabilities
$should_delete_tmp_file = !file_exists( $path );
$f = @fopen( $path, 'a' );
if ( $f === false )
return false;
fclose( $f );
if ( $should_delete_tmp_file )
unlink( $path );
return true;
}
/**
* Retrieves uploads directory information.
*
* Same as wp_upload_dir() but "light weight" as it doesn't attempt to create the uploads directory.
* Intended for use in themes, when only 'basedir' and 'baseurl' are needed, generally in all cases
* when not uploading files.
*
* @since 4.5.0
*
* @see wp_upload_dir()
*
* @return array See wp_upload_dir() for description.
*/
function wp_get_upload_dir() {
return wp_upload_dir( null, false );
}
/**
* Get an array containing the current upload directory's path and url.
*
* Checks the 'upload_path' option, which should be from the web root folder,
* and if it isn't empty it will be used. If it is empty, then the path will be
* 'WP_CONTENT_DIR/uploads'. If the 'UPLOADS' constant is defined, then it will
* override the 'upload_path' option and 'WP_CONTENT_DIR/uploads' path.
*
* The upload URL path is set either by the 'upload_url_path' option or by using
* the 'WP_CONTENT_URL' constant and appending '/uploads' to the path.
*
* If the 'uploads_use_yearmonth_folders' is set to true (checkbox if checked in
* the administration settings panel), then the time will be used. The format
* will be year first and then month.
*
* If the path couldn't be created, then an error will be returned with the key
* 'error' containing the error message. The error suggests that the parent
* directory is not writable by the server.
*
* On success, the returned array will have many indices:
* 'path' - base directory and sub directory or full path to upload directory.
* 'url' - base url and sub directory or absolute URL to upload directory.
* 'subdir' - sub directory if uploads use year/month folders option is on.
* 'basedir' - path without subdir.
* 'baseurl' - URL path without subdir.
* 'error' - false or error message.
*
* @since 2.0.0
* @uses _wp_upload_dir()
*
* @staticvar array $cache
* @staticvar array $tested_paths
*
* @param string $time Optional. Time formatted in 'yyyy/mm'. Default null.
* @param bool $create_dir Optional. Whether to check and create the uploads directory.
* Default true for backward compatibility.
* @param bool $refresh_cache Optional. Whether to refresh the cache. Default false.
* @return array See above for description.
*/
function wp_upload_dir( $time = null, $create_dir = true, $refresh_cache = false ) {
static $cache = array(), $tested_paths = array();
$key = sprintf( '%d-%s', get_current_blog_id(), (string) $time );
if ( $refresh_cache || empty( $cache[ $key ] ) ) {
$cache[ $key ] = _wp_upload_dir( $time );
}
/**
* Filters the uploads directory data.
*
* @since 2.0.0
*
* @param array $uploads Array of upload directory data with keys of 'path',
* 'url', 'subdir, 'basedir', and 'error'.
*/
$uploads = apply_filters( 'upload_dir', $cache[ $key ] );
if ( $create_dir ) {
$path = $uploads['path'];
if ( array_key_exists( $path, $tested_paths ) ) {
$uploads['error'] = $tested_paths[ $path ];
} else {
if ( ! wp_mkdir_p( $path ) ) {
if ( 0 === strpos( $uploads['basedir'], ABSPATH ) ) {
$error_path = str_replace( ABSPATH, '', $uploads['basedir'] ) . $uploads['subdir'];
} else {
$error_path = basename( $uploads['basedir'] ) . $uploads['subdir'];
}
$uploads['error'] = sprintf(
/* translators: %s: directory path */
__( 'Unable to create directory %s. Is its parent directory writable by the server?' ),
esc_html( $error_path )
);
}
$tested_paths[ $path ] = $uploads['error'];
}
}
return $uploads;
}
/**
* A non-filtered, non-cached version of wp_upload_dir() that doesn't check the path.
*
* @since 4.5.0
* @access private
*
* @param string $time Optional. Time formatted in 'yyyy/mm'. Default null.
* @return array See wp_upload_dir()
*/
function _wp_upload_dir( $time = null ) {
$siteurl = get_option( 'siteurl' );
$upload_path = trim( get_option( 'upload_path' ) );
if ( empty( $upload_path ) || 'wp-content/uploads' == $upload_path ) {
$dir = WP_CONTENT_DIR . '/uploads';
} elseif ( 0 !== strpos( $upload_path, ABSPATH ) ) {
// $dir is absolute, $upload_path is (maybe) relative to ABSPATH
$dir = path_join( ABSPATH, $upload_path );
} else {
$dir = $upload_path;
}
if ( !$url = get_option( 'upload_url_path' ) ) {
if ( empty($upload_path) || ( 'wp-content/uploads' == $upload_path ) || ( $upload_path == $dir ) )
$url = WP_CONTENT_URL . '/uploads';
else
$url = trailingslashit( $siteurl ) . $upload_path;
}
/*
* Honor the value of UPLOADS. This happens as long as ms-files rewriting is disabled.
* We also sometimes obey UPLOADS when rewriting is enabled -- see the next block.
*/
if ( defined( 'UPLOADS' ) && ! ( is_multisite() && get_site_option( 'ms_files_rewriting' ) ) ) {
$dir = ABSPATH . UPLOADS;
$url = trailingslashit( $siteurl ) . UPLOADS;
}
// If multisite (and if not the main site in a post-MU network)
if ( is_multisite() && ! ( is_main_network() && is_main_site() && defined( 'MULTISITE' ) ) ) {
if ( ! get_site_option( 'ms_files_rewriting' ) ) {
/*
* If ms-files rewriting is disabled (networks created post-3.5), it is fairly
* straightforward: Append sites/%d if we're not on the main site (for post-MU
* networks). (The extra directory prevents a four-digit ID from conflicting with
* a year-based directory for the main site. But if a MU-era network has disabled
* ms-files rewriting manually, they don't need the extra directory, as they never
* had wp-content/uploads for the main site.)
*/
if ( defined( 'MULTISITE' ) )
$ms_dir = '/sites/' . get_current_blog_id();
else
$ms_dir = '/' . get_current_blog_id();
$dir .= $ms_dir;
$url .= $ms_dir;
} elseif ( defined( 'UPLOADS' ) && ! ms_is_switched() ) {
/*
* Handle the old-form ms-files.php rewriting if the network still has that enabled.
* When ms-files rewriting is enabled, then we only listen to UPLOADS when:
* 1) We are not on the main site in a post-MU network, as wp-content/uploads is used
* there, and
* 2) We are not switched, as ms_upload_constants() hardcodes these constants to reflect
* the original blog ID.
*
* Rather than UPLOADS, we actually use BLOGUPLOADDIR if it is set, as it is absolute.
* (And it will be set, see ms_upload_constants().) Otherwise, UPLOADS can be used, as
* as it is relative to ABSPATH. For the final piece: when UPLOADS is used with ms-files
* rewriting in multisite, the resulting URL is /files. (#WP22702 for background.)
*/
if ( defined( 'BLOGUPLOADDIR' ) )
$dir = untrailingslashit( BLOGUPLOADDIR );
else
$dir = ABSPATH . UPLOADS;
$url = trailingslashit( $siteurl ) . 'files';
}
}
$basedir = $dir;
$baseurl = $url;
$subdir = '';
if ( get_option( 'uploads_use_yearmonth_folders' ) ) {
// Generate the yearly and monthly dirs
if ( !$time )
$time = current_time( 'mysql' );
$y = substr( $time, 0, 4 );
$m = substr( $time, 5, 2 );
$subdir = "/$y/$m";
}
$dir .= $subdir;
$url .= $subdir;
return array(
'path' => $dir,
'url' => $url,
'subdir' => $subdir,
'basedir' => $basedir,
'baseurl' => $baseurl,
'error' => false,
);
}
/**
* Get a filename that is sanitized and unique for the given directory.
*
* If the filename is not unique, then a number will be added to the filename
* before the extension, and will continue adding numbers until the filename is
* unique.
*
* The callback is passed three parameters, the first one is the directory, the
* second is the filename, and the third is the extension.
*
* @since 2.5.0
*
* @param string $dir Directory.
* @param string $filename File name.
* @param callable $unique_filename_callback Callback. Default null.
* @return string New filename, if given wasn't unique.
*/
function wp_unique_filename( $dir, $filename, $unique_filename_callback = null ) {
// Sanitize the file name before we begin processing.
$filename = sanitize_file_name($filename);
// Separate the filename into a name and extension.
$ext = pathinfo( $filename, PATHINFO_EXTENSION );
$name = pathinfo( $filename, PATHINFO_BASENAME );
if ( $ext ) {
$ext = '.' . $ext;
}
// Edge case: if file is named '.ext', treat as an empty name.
if ( $name === $ext ) {
$name = '';
}
/*
* Increment the file number until we have a unique file to save in $dir.
* Use callback if supplied.
*/
if ( $unique_filename_callback && is_callable( $unique_filename_callback ) ) {
$filename = call_user_func( $unique_filename_callback, $dir, $name, $ext );
} else {
$number = '';
// Change '.ext' to lower case.
if ( $ext && strtolower($ext) != $ext ) {
$ext2 = strtolower($ext);
$filename2 = preg_replace( '|' . preg_quote($ext) . '$|', $ext2, $filename );
// Check for both lower and upper case extension or image sub-sizes may be overwritten.
while ( file_exists($dir . "/$filename") || file_exists($dir . "/$filename2") ) {
$new_number = (int) $number + 1;
$filename = str_replace( array( "-$number$ext", "$number$ext" ), "-$new_number$ext", $filename );
$filename2 = str_replace( array( "-$number$ext2", "$number$ext2" ), "-$new_number$ext2", $filename2 );
$number = $new_number;
}
/**
* Filters the result when generating a unique file name.
*
* @since 4.5.0
*
* @param string $filename Unique file name.
* @param string $ext File extension, eg. ".png".
* @param string $dir Directory path.
* @param callable|null $unique_filename_callback Callback function that generates the unique file name.
*/
return apply_filters( 'wp_unique_filename', $filename2, $ext, $dir, $unique_filename_callback );
}
while ( file_exists( $dir . "/$filename" ) ) {
$new_number = (int) $number + 1;
if ( '' == "$number$ext" ) {
$filename = "$filename-" . $new_number;
} else {
$filename = str_replace( array( "-$number$ext", "$number$ext" ), "-" . $new_number . $ext, $filename );
}
$number = $new_number;
}
}
/** This filter is documented in wp-includes/functions.php */
return apply_filters( 'wp_unique_filename', $filename, $ext, $dir, $unique_filename_callback );
}
/**
* Create a file in the upload folder with given content.
*
* If there is an error, then the key 'error' will exist with the error message.
* If success, then the key 'file' will have the unique file path, the 'url' key
* will have the link to the new file. and the 'error' key will be set to false.
*
* This function will not move an uploaded file to the upload folder. It will
* create a new file with the content in $bits parameter. If you move the upload
* file, read the content of the uploaded file, and then you can give the
* filename and content to this function, which will add it to the upload
* folder.
*
* The permissions will be set on the new file automatically by this function.
*
* @since 2.0.0
*
* @param string $name Filename.
* @param null|string $deprecated Never used. Set to null.
* @param mixed $bits File content
* @param string $time Optional. Time formatted in 'yyyy/mm'. Default null.
* @return array
*/
function wp_upload_bits( $name, $deprecated, $bits, $time = null ) {
if ( !empty( $deprecated ) )
_deprecated_argument( __FUNCTION__, '2.0.0' );
if ( empty( $name ) )
return array( 'error' => __( 'Empty filename' ) );
$wp_filetype = wp_check_filetype( $name );
if ( ! $wp_filetype['ext'] && ! current_user_can( 'unfiltered_upload' ) )
return array( 'error' => __( 'Sorry, this file type is not permitted for security reasons.' ) );
$upload = wp_upload_dir( $time );
if ( $upload['error'] !== false )
return $upload;
/**
* Filters whether to treat the upload bits as an error.
*
* Passing a non-array to the filter will effectively short-circuit preparing
* the upload bits, returning that value instead.
*
* @since 3.0.0
*
* @param mixed $upload_bits_error An array of upload bits data, or a non-array error to return.
*/
$upload_bits_error = apply_filters( 'wp_upload_bits', array( 'name' => $name, 'bits' => $bits, 'time' => $time ) );
if ( !is_array( $upload_bits_error ) ) {
$upload[ 'error' ] = $upload_bits_error;
return $upload;
}
$filename = wp_unique_filename( $upload['path'], $name );
$new_file = $upload['path'] . "/$filename";
if ( ! wp_mkdir_p( dirname( $new_file ) ) ) {
if ( 0 === strpos( $upload['basedir'], ABSPATH ) )
$error_path = str_replace( ABSPATH, '', $upload['basedir'] ) . $upload['subdir'];
else
$error_path = basename( $upload['basedir'] ) . $upload['subdir'];
$message = sprintf(
/* translators: %s: directory path */
__( 'Unable to create directory %s. Is its parent directory writable by the server?' ),
$error_path
);
return array( 'error' => $message );
}
$ifp = @ fopen( $new_file, 'wb' );
if ( ! $ifp )
return array( 'error' => sprintf( __( 'Could not write file %s' ), $new_file ) );
@fwrite( $ifp, $bits );
fclose( $ifp );
clearstatcache();
// Set correct file permissions
$stat = @ stat( dirname( $new_file ) );
$perms = $stat['mode'] & 0007777;
$perms = $perms & 0000666;
@ chmod( $new_file, $perms );
clearstatcache();
// Compute the URL
$url = $upload['url'] . "/$filename";
/** This filter is documented in wp-admin/includes/file.php */
return apply_filters( 'wp_handle_upload', array( 'file' => $new_file, 'url' => $url, 'type' => $wp_filetype['type'], 'error' => false ), 'sideload' );
}
/**
* Retrieve the file type based on the extension name.
*
* @since 2.5.0
*
* @param string $ext The extension to search.
* @return string|void The file type, example: audio, video, document, spreadsheet, etc.
*/
function wp_ext2type( $ext ) {
$ext = strtolower( $ext );
$ext2type = wp_get_ext_types();
foreach ( $ext2type as $type => $exts )
if ( in_array( $ext, $exts ) )
return $type;
}
/**
* Retrieve the file type from the file name.
*
* You can optionally define the mime array, if needed.
*
* @since 2.0.4
*
* @param string $filename File name or path.
* @param array $mimes Optional. Key is the file extension with value as the mime type.
* @return array Values with extension first and mime type.
*/
function wp_check_filetype( $filename, $mimes = null ) {
if ( empty($mimes) )
$mimes = get_allowed_mime_types();
$type = false;
$ext = false;
foreach ( $mimes as $ext_preg => $mime_match ) {
$ext_preg = '!\.(' . $ext_preg . ')$!i';
if ( preg_match( $ext_preg, $filename, $ext_matches ) ) {
$type = $mime_match;
$ext = $ext_matches[1];
break;
}
}
return compact( 'ext', 'type' );
}
/**
* Attempt to determine the real file type of a file.
*
* If unable to, the file name extension will be used to determine type.
*
* If it's determined that the extension does not match the file's real type,
* then the "proper_filename" value will be set with a proper filename and extension.
*
* Currently this function only supports renaming images validated via wp_get_image_mime().
*
* @since 3.0.0
*
* @param string $file Full path to the file.
* @param string $filename The name of the file (may differ from $file due to $file being
* in a tmp directory).
* @param array $mimes Optional. Key is the file extension with value as the mime type.
* @return array Values for the extension, MIME, and either a corrected filename or false
* if original $filename is valid.
*/
function wp_check_filetype_and_ext( $file, $filename, $mimes = null ) {
$proper_filename = false;
// Do basic extension validation and MIME mapping
$wp_filetype = wp_check_filetype( $filename, $mimes );
$ext = $wp_filetype['ext'];
$type = $wp_filetype['type'];
// We can't do any further validation without a file to work with
if ( ! file_exists( $file ) ) {
return compact( 'ext', 'type', 'proper_filename' );
}
$real_mime = false;
// Validate image types.
if ( $type && 0 === strpos( $type, 'image/' ) ) {
// Attempt to figure out what type of image it actually is
$real_mime = wp_get_image_mime( $file );
if ( $real_mime && $real_mime != $type ) {
/**
* Filters the list mapping image mime types to their respective extensions.
*
* @since 3.0.0
*
* @param array $mime_to_ext Array of image mime types and their matching extensions.
*/
$mime_to_ext = apply_filters( 'getimagesize_mimes_to_exts', array(
'image/jpeg' => 'jpg',
'image/png' => 'png',
'image/gif' => 'gif',
'image/bmp' => 'bmp',
'image/tiff' => 'tif',
) );
// Replace whatever is after the last period in the filename with the correct extension
if ( ! empty( $mime_to_ext[ $real_mime ] ) ) {
$filename_parts = explode( '.', $filename );
array_pop( $filename_parts );
$filename_parts[] = $mime_to_ext[ $real_mime ];
$new_filename = implode( '.', $filename_parts );
if ( $new_filename != $filename ) {
$proper_filename = $new_filename; // Mark that it changed
}
// Redefine the extension / MIME
$wp_filetype = wp_check_filetype( $new_filename, $mimes );
$ext = $wp_filetype['ext'];
$type = $wp_filetype['type'];
} else {
// Reset $real_mime and try validating again.
$real_mime = false;
}
}
}
// Validate files that didn't get validated during previous checks.
if ( $type && ! $real_mime && extension_loaded( 'fileinfo' ) ) {
$finfo = finfo_open( FILEINFO_MIME_TYPE );
$real_mime = finfo_file( $finfo, $file );
finfo_close( $finfo );
/*
* If $real_mime doesn't match what we're expecting, we need to do some extra
* vetting of application mime types to make sure this type of file is allowed.
* Other mime types are assumed to be safe, but should be considered unverified.
*/
if ( $real_mime && ( $real_mime !== $type ) && ( 0 === strpos( $real_mime, 'application' ) ) ) {
$allowed = get_allowed_mime_types();
if ( ! in_array( $real_mime, $allowed ) ) {
$type = $ext = false;
}
}
}
/**
* Filters the "real" file type of the given file.
*
* @since 3.0.0
*
* @param array $wp_check_filetype_and_ext File data array containing 'ext', 'type', and
* 'proper_filename' keys.
* @param string $file Full path to the file.
* @param string $filename The name of the file (may differ from $file due to
* $file being in a tmp directory).
* @param array $mimes Key is the file extension with value as the mime type.
*/
return apply_filters( 'wp_check_filetype_and_ext', compact( 'ext', 'type', 'proper_filename' ), $file, $filename, $mimes );
}
/**
* Returns the real mime type of an image file.
*
* This depends on exif_imagetype() or getimagesize() to determine real mime types.
*
* @since 4.7.1
*
* @param string $file Full path to the file.
* @return string|false The actual mime type or false if the type cannot be determined.
*/
function wp_get_image_mime( $file ) {
/*
* Use exif_imagetype() to check the mimetype if available or fall back to
* getimagesize() if exif isn't avaialbe. If either function throws an Exception
* we assume the file could not be validated.
*/
try {
if ( is_callable( 'exif_imagetype' ) ) {
$imagetype = exif_imagetype( $file );
$mime = ( $imagetype ) ? image_type_to_mime_type( $imagetype ) : false;
} elseif ( function_exists( 'getimagesize' ) ) {
$imagesize = getimagesize( $file );
$mime = ( isset( $imagesize['mime'] ) ) ? $imagesize['mime'] : false;
} else {
$mime = false;
}
} catch ( Exception $e ) {
$mime = false;
}
return $mime;
}
/**
* Retrieve list of mime types and file extensions.
*
* @since 3.5.0
* @since 4.2.0 Support was added for GIMP (xcf) files.
*
* @return array Array of mime types keyed by the file extension regex corresponding to those types.
*/
function wp_get_mime_types() {
/**
* Filters the list of mime types and file extensions.
*
* This filter should be used to add, not remove, mime types. To remove
* mime types, use the {@see 'upload_mimes'} filter.
*
* @since 3.5.0
*
* @param array $wp_get_mime_types Mime types keyed by the file extension regex
* corresponding to those types.
*/
return apply_filters( 'mime_types', array(
// Image formats.
'jpg|jpeg|jpe' => 'image/jpeg',
'gif' => 'image/gif',
'png' => 'image/png',
'bmp' => 'image/bmp',
'tiff|tif' => 'image/tiff',
'ico' => 'image/x-icon',
// Video formats.
'asf|asx' => 'video/x-ms-asf',
'wmv' => 'video/x-ms-wmv',
'wmx' => 'video/x-ms-wmx',
'wm' => 'video/x-ms-wm',
'avi' => 'video/avi',
'divx' => 'video/divx',
'flv' => 'video/x-flv',
'mov|qt' => 'video/quicktime',
'mpeg|mpg|mpe' => 'video/mpeg',
'mp4|m4v' => 'video/mp4',
'ogv' => 'video/ogg',
'webm' => 'video/webm',
'mkv' => 'video/x-matroska',
'3gp|3gpp' => 'video/3gpp', // Can also be audio
'3g2|3gp2' => 'video/3gpp2', // Can also be audio
// Text formats.
'txt|asc|c|cc|h|srt' => 'text/plain',
'csv' => 'text/csv',
'tsv' => 'text/tab-separated-values',
'ics' => 'text/calendar',
'rtx' => 'text/richtext',
'css' => 'text/css',
'htm|html' => 'text/html',
'vtt' => 'text/vtt',
'dfxp' => 'application/ttaf+xml',
// Audio formats.
'mp3|m4a|m4b' => 'audio/mpeg',
'ra|ram' => 'audio/x-realaudio',
'wav' => 'audio/wav',
'ogg|oga' => 'audio/ogg',
'flac' => 'audio/flac',
'mid|midi' => 'audio/midi',
'wma' => 'audio/x-ms-wma',
'wax' => 'audio/x-ms-wax',
'mka' => 'audio/x-matroska',
// Misc application formats.
'rtf' => 'application/rtf',
'js' => 'application/javascript',
'pdf' => 'application/pdf',
'swf' => 'application/x-shockwave-flash',
'class' => 'application/java',
'tar' => 'application/x-tar',
'zip' => 'application/zip',
'gz|gzip' => 'application/x-gzip',
'rar' => 'application/rar',
'7z' => 'application/x-7z-compressed',
'exe' => 'application/x-msdownload',
'psd' => 'application/octet-stream',
'xcf' => 'application/octet-stream',
// MS Office formats.
'doc' => 'application/msword',
'pot|pps|ppt' => 'application/vnd.ms-powerpoint',
'wri' => 'application/vnd.ms-write',
'xla|xls|xlt|xlw' => 'application/vnd.ms-excel',
'mdb' => 'application/vnd.ms-access',
'mpp' => 'application/vnd.ms-project',
'docx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.document',
'docm' => 'application/vnd.ms-word.document.macroEnabled.12',
'dotx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.template',
'dotm' => 'application/vnd.ms-word.template.macroEnabled.12',
'xlsx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet',
'xlsm' => 'application/vnd.ms-excel.sheet.macroEnabled.12',
'xlsb' => 'application/vnd.ms-excel.sheet.binary.macroEnabled.12',
'xltx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.template',
'xltm' => 'application/vnd.ms-excel.template.macroEnabled.12',
'xlam' => 'application/vnd.ms-excel.addin.macroEnabled.12',
'pptx' => 'application/vnd.openxmlformats-officedocument.presentationml.presentation',
'pptm' => 'application/vnd.ms-powerpoint.presentation.macroEnabled.12',
'ppsx' => 'application/vnd.openxmlformats-officedocument.presentationml.slideshow',
'ppsm' => 'application/vnd.ms-powerpoint.slideshow.macroEnabled.12',
'potx' => 'application/vnd.openxmlformats-officedocument.presentationml.template',
'potm' => 'application/vnd.ms-powerpoint.template.macroEnabled.12',
'ppam' => 'application/vnd.ms-powerpoint.addin.macroEnabled.12',
'sldx' => 'application/vnd.openxmlformats-officedocument.presentationml.slide',
'sldm' => 'application/vnd.ms-powerpoint.slide.macroEnabled.12',
'onetoc|onetoc2|onetmp|onepkg' => 'application/onenote',
'oxps' => 'application/oxps',
'xps' => 'application/vnd.ms-xpsdocument',
// OpenOffice formats.
'odt' => 'application/vnd.oasis.opendocument.text',
'odp' => 'application/vnd.oasis.opendocument.presentation',
'ods' => 'application/vnd.oasis.opendocument.spreadsheet',
'odg' => 'application/vnd.oasis.opendocument.graphics',
'odc' => 'application/vnd.oasis.opendocument.chart',
'odb' => 'application/vnd.oasis.opendocument.database',
'odf' => 'application/vnd.oasis.opendocument.formula',
// WordPerfect formats.
'wp|wpd' => 'application/wordperfect',
// iWork formats.
'key' => 'application/vnd.apple.keynote',
'numbers' => 'application/vnd.apple.numbers',
'pages' => 'application/vnd.apple.pages',
) );
}
/**
* Retrieves the list of common file extensions and their types.
*
* @since 4.6.0
*
* @return array Array of file extensions types keyed by the type of file.
*/
function wp_get_ext_types() {
/**
* Filters file type based on the extension name.
*
* @since 2.5.0
*
* @see wp_ext2type()
*
* @param array $ext2type Multi-dimensional array with extensions for a default set
* of file types.
*/
return apply_filters( 'ext2type', array(
'image' => array( 'jpg', 'jpeg', 'jpe', 'gif', 'png', 'bmp', 'tif', 'tiff', 'ico' ),
'audio' => array( 'aac', 'ac3', 'aif', 'aiff', 'flac', 'm3a', 'm4a', 'm4b', 'mka', 'mp1', 'mp2', 'mp3', 'ogg', 'oga', 'ram', 'wav', 'wma' ),
'video' => array( '3g2', '3gp', '3gpp', 'asf', 'avi', 'divx', 'dv', 'flv', 'm4v', 'mkv', 'mov', 'mp4', 'mpeg', 'mpg', 'mpv', 'ogm', 'ogv', 'qt', 'rm', 'vob', 'wmv' ),
'document' => array( 'doc', 'docx', 'docm', 'dotm', 'odt', 'pages', 'pdf', 'xps', 'oxps', 'rtf', 'wp', 'wpd', 'psd', 'xcf' ),
'spreadsheet' => array( 'numbers', 'ods', 'xls', 'xlsx', 'xlsm', 'xlsb' ),
'interactive' => array( 'swf', 'key', 'ppt', 'pptx', 'pptm', 'pps', 'ppsx', 'ppsm', 'sldx', 'sldm', 'odp' ),
'text' => array( 'asc', 'csv', 'tsv', 'txt' ),
'archive' => array( 'bz2', 'cab', 'dmg', 'gz', 'rar', 'sea', 'sit', 'sqx', 'tar', 'tgz', 'zip', '7z' ),
'code' => array( 'css', 'htm', 'html', 'php', 'js' ),
) );
}
/**
* Retrieve list of allowed mime types and file extensions.
*
* @since 2.8.6
*
* @param int|WP_User $user Optional. User to check. Defaults to current user.
* @return array Array of mime types keyed by the file extension regex corresponding
* to those types.
*/
function get_allowed_mime_types( $user = null ) {
$t = wp_get_mime_types();
unset( $t['swf'], $t['exe'] );
if ( function_exists( 'current_user_can' ) )
$unfiltered = $user ? user_can( $user, 'unfiltered_html' ) : current_user_can( 'unfiltered_html' );
if ( empty( $unfiltered ) ) {
unset( $t['htm|html'], $t['js'] );
}
/**
* Filters list of allowed mime types and file extensions.
*
* @since 2.0.0
*
* @param array $t Mime types keyed by the file extension regex corresponding to
* those types. 'swf' and 'exe' removed from full list. 'htm|html' also
* removed depending on '$user' capabilities.
* @param int|WP_User|null $user User ID, User object or null if not provided (indicates current user).
*/
return apply_filters( 'upload_mimes', $t, $user );
}
/**
* Display "Are You Sure" message to confirm the action being taken.
*
* If the action has the nonce explain message, then it will be displayed
* along with the "Are you sure?" message.
*
* @since 2.0.4
*
* @param string $action The nonce action.
*/
function wp_nonce_ays( $action ) {
if ( 'log-out' == $action ) {
$html = sprintf(
/* translators: %s: site name */
__( 'You are attempting to log out of %s' ),
get_bloginfo( 'name' )
);
$html .= '</p><p>';
$redirect_to = isset( $_REQUEST['redirect_to'] ) ? $_REQUEST['redirect_to'] : '';
$html .= sprintf(
/* translators: %s: logout URL */
__( 'Do you really want to <a href="%s">log out</a>?' ),
wp_logout_url( $redirect_to )
);
} else {
$html = __( 'Are you sure you want to do this?' );
if ( wp_get_referer() ) {
$html .= '</p><p>';
$html .= sprintf( '<a href="%s">%s</a>',
esc_url( remove_query_arg( 'updated', wp_get_referer() ) ),
__( 'Please try again.' )
);
}
}
wp_die( $html, __( 'WordPress Failure Notice' ), 403 );
}
/**
* Kill WordPress execution and display HTML message with error message.
*
* This function complements the `die()` PHP function. The difference is that
* HTML will be displayed to the user. It is recommended to use this function
* only when the execution should not continue any further. It is not recommended
* to call this function very often, and try to handle as many errors as possible
* silently or more gracefully.
*
* As a shorthand, the desired HTTP response code may be passed as an integer to
* the `$title` parameter (the default title would apply) or the `$args` parameter.
*
* @since 2.0.4
* @since 4.1.0 The `$title` and `$args` parameters were changed to optionally accept
* an integer to be used as the response code.
*
* @param string|WP_Error $message Optional. Error message. If this is a WP_Error object,
* and not an Ajax or XML-RPC request, the error's messages are used.
* Default empty.
* @param string|int $title Optional. Error title. If `$message` is a `WP_Error` object,
* error data with the key 'title' may be used to specify the title.
* If `$title` is an integer, then it is treated as the response
* code. Default empty.
* @param string|array|int $args {
* Optional. Arguments to control behavior. If `$args` is an integer, then it is treated
* as the response code. Default empty array.
*
* @type int $response The HTTP response code. Default 200 for Ajax requests, 500 otherwise.
* @type bool $back_link Whether to include a link to go back. Default false.
* @type string $text_direction The text direction. This is only useful internally, when WordPress
* is still loading and the site's locale is not set up yet. Accepts 'rtl'.
* Default is the value of is_rtl().
* }
*/
function wp_die( $message = '', $title = '', $args = array() ) {
if ( is_int( $args ) ) {
$args = array( 'response' => $args );
} elseif ( is_int( $title ) ) {
$args = array( 'response' => $title );
$title = '';
}
if ( wp_doing_ajax() ) {
/**
* Filters the callback for killing WordPress execution for Ajax requests.
*
* @since 3.4.0
*
* @param callable $function Callback function name.
*/
$function = apply_filters( 'wp_die_ajax_handler', '_ajax_wp_die_handler' );
} elseif ( defined( 'XMLRPC_REQUEST' ) && XMLRPC_REQUEST ) {
/**
* Filters the callback for killing WordPress execution for XML-RPC requests.
*
* @since 3.4.0
*
* @param callable $function Callback function name.
*/
$function = apply_filters( 'wp_die_xmlrpc_handler', '_xmlrpc_wp_die_handler' );
} else {
/**
* Filters the callback for killing WordPress execution for all non-Ajax, non-XML-RPC requests.
*
* @since 3.0.0
*
* @param callable $function Callback function name.
*/
$function = apply_filters( 'wp_die_handler', '_default_wp_die_handler' );
}
call_user_func( $function, $message, $title, $args );
}
/**
* Kills WordPress execution and display HTML message with error message.
*
* This is the default handler for wp_die if you want a custom one for your
* site then you can overload using the {@see 'wp_die_handler'} filter in wp_die().
*
* @since 3.0.0
* @access private
*
* @param string|WP_Error $message Error message or WP_Error object.
* @param string $title Optional. Error title. Default empty.
* @param string|array $args Optional. Arguments to control behavior. Default empty array.
*/
function _default_wp_die_handler( $message, $title = '', $args = array() ) {
$defaults = array( 'response' => 500 );
$r = wp_parse_args($args, $defaults);
$have_gettext = function_exists('__');
if ( function_exists( 'is_wp_error' ) && is_wp_error( $message ) ) {
if ( empty( $title ) ) {
$error_data = $message->get_error_data();
if ( is_array( $error_data ) && isset( $error_data['title'] ) )
$title = $error_data['title'];
}
$errors = $message->get_error_messages();
switch ( count( $errors ) ) {
case 0 :
$message = '';
break;
case 1 :
$message = "<p>{$errors[0]}</p>";
break;
default :
$message = "<ul>\n\t\t<li>" . join( "</li>\n\t\t<li>", $errors ) . "</li>\n\t</ul>";
break;
}
} elseif ( is_string( $message ) ) {
$message = "<p>$message</p>";
}
if ( isset( $r['back_link'] ) && $r['back_link'] ) {
$back_text = $have_gettext? __('« Back') : '« Back';
$message .= "\n<p><a href='javascript:history.back()'>$back_text</a></p>";
}
if ( ! did_action( 'admin_head' ) ) :
if ( !headers_sent() ) {
status_header( $r['response'] );
nocache_headers();
header( 'Content-Type: text/html; charset=utf-8' );
}
if ( empty($title) )
$title = $have_gettext ? __('WordPress › Error') : 'WordPress › Error';
$text_direction = 'ltr';
if ( isset($r['text_direction']) && 'rtl' == $r['text_direction'] )
$text_direction = 'rtl';
elseif ( function_exists( 'is_rtl' ) && is_rtl() )
$text_direction = 'rtl';
?>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml" <?php if ( function_exists( 'language_attributes' ) && function_exists( 'is_rtl' ) ) language_attributes(); else echo "dir='$text_direction'"; ?>>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="viewport" content="width=device-width">
<?php
if ( function_exists( 'wp_no_robots' ) ) {
wp_no_robots();
}
?>
<title><?php echo $title ?>